One common issue that Samsung dryer users may encounter is the Samsung Dryer TE Error code, which points to a problem with the thermistor, a crucial component responsible for regulating temperature. If your Samsung dryer is flashing this error, don’t panic. This comprehensive guide will walk you through what the TE error means, its causes, how to fix it, and when to call in a professional from Express Repair.
The TE error stands for Thermistor Error. The thermistor is a sensor that monitors the temperature inside the dryer drum and ensures that it does not overheat. When the thermistor is faulty or its electrical connections are disrupted, the dryer cannot accurately detect temperature. As a result, it triggers the TE error to prevent damage to internal components or your laundry.
Understanding the root cause of the TE error is the first step in fixing it. Below are the most common reasons for this issue:
Over time, the thermistor may fail due to wear and tear, heat exposure, or manufacturing defects. A faulty thermistor cannot measure temperature accurately, which causes the dryer to shut down.
The thermistor relies on electrical wiring to transmit data to the control board. If these wires are frayed, burnt, or disconnected, the system may misinterpret the absence of signal as a thermistor failure.
Lint or moisture build-up near the thermistor can cause false readings or short circuits. Regular maintenance is crucial to prevent such accumulation.
Although less common, a damaged control board can misread signals from a working thermistor and trigger a TE error.
Here are steps to help you diagnose and potentially fix the TE error. Before you begin, unplug the dryer to avoid electrical shock.
Sometimes, the error may result from a temporary glitch. Try unplugging your dryer for 1–2 minutes, then plugging it back in. If the error code persists, proceed to the next step.
Locate the thermistor (usually near the heating element or blower housing) by referring to your dryer’s service manual. Check for physical damage, discoloration, or signs of burning. Use a multimeter to test resistance; a working thermistor should have a resistance value of 10K ohms at room temperature (25°C/77°F).
Inspect the wire harness connected to the thermistor. Look for any signs of frayed wires, loose connections, or burnt insulation. Secure any loose wires or replace damaged ones.
If the area around the thermistor is clogged with lint or dust, clean it gently with a soft brush or vacuum. Ensure the airflow is unobstructed to maintain proper drying efficiency.
If the thermistor fails the multimeter test or appears damaged, replacing it is your best option. Thermistors are relatively inexpensive and available from authorized parts retailers. Make sure to order a part that matches your Samsung dryer model.
While DIY troubleshooting can solve minor issues, some problems are best left to certified dryer repair technicians. Here’s when to call Express Repair:
You don’t feel confident opening the appliance or handling electrical components.
The thermistor replacement didn’t fix the issue.
You suspect a control board or sensor calibration problem.
There are signs of water damage or burning smells inside the dryer.
Our team is experienced with Samsung dryer repairs and can ensure a safe, long-lasting fix. Plus, we offer same-day appointments and use genuine parts.
Prevention is key to keeping your Samsung dryer running smoothly. Here are some maintenance tips:
Clean the lint filter after every cycle to maintain airflow.
Schedule regular professional maintenance to inspect internal components.
Keep the dryer in a dry area to avoid moisture damage.
Avoid overloading the drum, which can strain the thermistor and heating system.
With the right care, you can minimize the chances of running into the TE error again.
At Express Repair, we specialize in appliance diagnostics and repair for all major brands, including Samsung. When you call us for a Samsung dryer TE error, you’re choosing:
Certified technicians with years of experience.
Fast and efficient service with same-day availability.
Fully stocked vans with genuine Samsung parts.
Honest pricing with no hidden fees.
We understand how frustrating a broken dryer can be, especially when it interrupts your routine. That’s why we’re committed to delivering fast, reliable repairs that stand the test of time.
The Samsung dryer TE error may seem intimidating, but with the right information and guidance, it’s a manageable issue. Whether you decide to troubleshoot it yourself or call in the pros, identifying the root cause early on can save you time and money. Call Express Appliance Repair to get your dryer—and your laundry—back on track quickly and safely.
(647) 492-7773
Available 7 am – 10 pm including weekends and holidays
Request Service
(647) 492-7773
