0807, 2025
Samsung Washer Error Code 1E / LE / IE / SUDS –Fix Guide

Samsung Washer Error Code 1E / LE / IE / SUDS –Fix Guide

If your Samsung washing machine is showing one of the following error codes — Error Code 1E / LE / IE / SUDS — chances are you’re dealing with a water supply issue. These codes may appear differently depending on the model, but they usually point to one core problem: your washer isn’t getting the water it needs, or there’s too much soap disrupting the proper flow. Before you panic or call for a technician, this guide will walk you through simple troubleshooting steps that might fix the problem. If all else fails, our local express repair team is ready to help with same-day service.

What Do These Samsung Washer Error Codes Mean?

Error Code 1E / LE / IE / SUDS

Let’s break down the codes:

  • 1E or IE – Your washer can’t detect water entering the machine.
  • LE – There’s a water leakage issue or low water level detected during operation.
  • SUDS – Too many suds have been detected, usually from using too much detergent or the wrong kind.

These errors often prevent your washer from starting or finishing a cycle properly. They may appear early in the cycle or halfway through depending on the problem.

Step-by-Step Fixes You Can Try

Samsung washer Step-by-Step Fixes You Can Try

1. Check Water Supply Valves

Make sure both hot and cold water supply valves are fully open. Even if you’re using cold water only, both lines need to be on for proper function in some models.

2. Inspect Water Hoses

Unplug the washer and pull it away from the wall. Examine the hoses connected to the back for:

  • Kinks or pinches
  • Freezing or blockages
  • Leaking or worn-out connections

If needed, detach the hoses and check the filters inside the water inlet ports. They can get clogged with debris over time.

3. Clean the Detergent Drawer

Error SUDS usually means excessive foaming is detected. Pull out the detergent drawer and rinse it thoroughly with warm water. Use HE (high efficiency) detergent and the recommended amount to prevent this in the future.

4. Run a Rinse and Spin Cycle

After cleaning the drawer and reducing the soap usage, run a rinse and spin cycle to flush out any remaining suds or blockage.

5. Reset the Machine

Sometimes, all it takes is a reset:

  • Unplug your washer for 1-2 minutes.
  • Plug it back in and start a cycle again.

If the error persists, there may be a sensor issue or a deeper internal problem that requires professional repair.

When to Call the Pros

If you’ve tried everything above and your Samsung washer still flashes Error Code 1E / LE / IE / SUDS, it’s time to call a technician. Issues like a faulty water inlet valve, pressure sensor, or main control board require technical knowledge and tools.

That’s where we come in. Our local technicians offer fast, emergency service and can often resolve the issue on the same day. We proudly serve homeowners searching for washer repair near me, with reliability and professionalism.

📞 Need help now? Contact our team to book your service. Don’t forget—book online and get $25 off your repair! Plus, you’ll receive a free service call with repair.

Why Choose Express Repair?

  • 🚚 Same day service
  • 📍 Local technicians near you
  • Emergency appointments available
  • 💸 $25 off when you book online
  • Free service call with repair

We make it simple, fast, and affordable to get your Samsung washer running like new again.

Stop struggling with water supply errors and let the pros take over. Whether it’s a quick fix or something more involved, we’re just a click or call away.

(647) 492-7773
Available 7 am – 10 pm including weekends and holidays