Samsung Washer Error Code 4E / 4E1 / 4E2 – Water Filling

If your Samsung washing machine has suddenly stopped and shows an error code like Error Code 4E / 4E1 / 4E2, don’t panic. These codes are all related to water filling issues, and while they can be frustrating, they’re often fixable with a few simple steps.

In this guide, we’ll walk you through what these codes mean, how to troubleshoot the problem, and when it’s time to call a local professional. If at any point you feel stuck or don’t have the time, our Express Repair team is always ready to help with same-day, emergency washer repairs, and you can even book online and get $25 off.

What Do Samsung Error Codes 4E / 4E1 / 4E2 Mean?

These error codes, Error Code 4E / 4E1 / 4E2, all point to the same basic issue: your washer isn’t getting enough water. Here’s a quick breakdown:

• 4E: General water supply error.
• 4E1: Water temperature is too low during the fill cycle.
• 4E2: Water temperature is too high during the fill cycle.

These codes usually appear at the start of a wash cycle, when your washer attempts to fill with water.

DIY Troubleshooting Steps

Before calling in a professional, try these steps to fix the problem yourself:

1. Check the Water Supply Valves

Make sure both the hot and cold water valves are fully open. If one is closed or only partially open, your machine may not fill properly.

2. Inspect the Inlet Hoses

Disconnect the water hoses and check for:

• Kinks or blockages
• Clogged inlet filters
• Frozen hoses (in colder months)

Clean the filters and ensure water flows freely through the hoses.

3. Ensure Proper Water Pressure

Samsung washers require decent water pressure. If the water trickles out slowly when you disconnect the hose, there may be a plumbing issue that needs attention.

4. Test the Water Temperature Sensors (for 4E1 / 4E2)

These errors can occur if the hot and cold hoses are connected to the wrong ports or if your water heater is set incorrectly. Try switching the hoses to see if that resolves the issue.

5. Power Cycle the Machine

Turn the washer off, unplug it for a few minutes, then plug it back in. Sometimes, a simple reset can clear the error.

When to Call a Professional

If you’ve tried the above steps and your Samsung washer still flashes Error Code 4E / 4E1 / 4E2it’s time to call in the pros. Issues like:

• Defective inlet valves
• Faulty temperature sensors
• Internal wiring problems
  Require proper tools and diagnostics.

Our Express Repair team offers fast, reliable, and local washer repairs, with a free service call with repair. If you’re searching for a solution “near me,” we’ve got your back. We handle emergency appointments and often deliver same-day service.

👉 Contact us now to schedule your repair and get your washer running again in no time.

Final Tips

• Don’t ignore the error – running cycles without water can damage your machine.
• Regular maintenance of hoses and filters can help prevent these issues in the future.
• When in doubt, save time and stress by reaching out to a certified technician.

Need help now? Book your repair online and get $25 off your service.

Trust your washer with the local experts at Express Repair – here when you need us most.

(647) 492-7773

Available 7 am – 10 pm including weekends and holidays