If you own a Samsung washing machine and suddenly see the PC error code, you’re likely wondering what’s gone wrong — and more importantly, how to fix it. This code refers to a Clutch Position Control Error, a problem that can stop your washer mid-cycle and delay your laundry day. Don’t worry — we’re here to help you understand the issue and guide you through possible solutions. And if you need fast, same-day repair, our local technicians are just a call away.
The PC code stands for “Position Control”, which is directly related to the clutch assembly of your washer. The clutch is responsible for switching between spinning and agitating modes. When this part fails to move properly or its position cannot be detected by the machine, your Samsung washer throws up the PC error.
This issue is most common in top-load Samsung washers equipped with Direct Drive motors, where the sensor that detects the clutch’s position either malfunctions or loses its calibration.
Yes — in some cases, you can handle it without needing professional repair. Here are a few things you can try:
1. Power Cycle Your Washer
Unplug the washing machine for about 5 minutes to reset its system. Sometimes the error is just a glitch that clears after a restart.
2. Inspect the Clutch Sensor
If you’re comfortable removing the back panel, check the clutch sensor and its wiring. Look for:
Note: Avoid forcing any components if you’re not familiar with washer internals — damage could worsen the issue.
3. Run a Diagnostic Test
Some Samsung models allow you to enter Service Mode and run a diagnostic check. This can help determine if the sensor is truly faulty or if there’s a mechanical issue.
If the error persists after these steps — or you’re not comfortable taking your washer apart — it’s time to bring in an expert. The clutch assembly or sensor may need replacement, and trying to DIY it could void your warranty or cause more problems.
That’s where we come in.
We offer fast, local repair services near you, and we understand how disruptive a broken washer can be. Whether it’s an emergency breakdown or just a frustrating issue like this PC error, our technicians arrive prepared to diagnose and fix the problem on the same day, in most cases.
👉 Let us handle your washer repair now.
The Samsung washer PC error code can be frustrating, but it’s often a fixable issue — either with a quick reset or professional help. If you’ve tried the basic troubleshooting steps and are still stuck, don’t hesitate. Save your time, avoid the stress, and let a trusted, express repair team near you take care of it.
💡 Contact us now to book your repair — and don’t forget, book online and get $25 off on all repairs!
Request Service
(647) 492-7773
