Samsung Washing Machine Error Code DC – Door Issue

If your Samsung washing machine suddenly flashes the DC error code, it’s trying to tell you there’s a problem with the door, specifically, that it’s not closing or locking properly. This can be frustrating, especially mid-laundry, but the good news is that you might be able to fix it yourself with a few simple checks.

What Does the DC Error Mean?

The DC code stands for “Door Closed.” When your washer can’t detect that the door is securely locked, it refuses to start or continue a wash cycle for safety reasons. It’s common in both front-load and top-load Samsung machines, and the issue can pop up unexpectedly, even if everything looks fine from the outside.

Common Causes of the DC Error

Several issues can cause this error:

• Door not fully closed: A towel or sock might be stuck, preventing full closure.
• Misaligned door latch: Repeated slamming or wear can shift the latch out of place.
• Faulty door lock mechanism: The internal sensor may be worn or broken.
• Loose or damaged wiring: Wires connecting the door lock to the control board might be disconnected or frayed.
• Overloaded drum: Too many clothes can put pressure on the door and stop it from sealing.

Try This Before Calling a Technician

If you’re dealing with a laundry emergency, try these fast troubleshooting tips before calling for repair:

1. Inspect and Clear the Door

Open and close the door firmly. Check for stuck clothing, buildup on the latch, or signs of physical damage.

2. Reset the Washer

Sometimes a simple reset clears the error. Unplug your washer for 1–2 minutes, then plug it back in and try starting a cycle.

3. Look for Obvious Damage

Check the door latch and the rubber seal for cracks, misalignment, or looseness. If you see something broken, it might be time to call for a local appliance repair specialist.

4. Reduce the Load

If your drum is packed tightly, redistribute the laundry evenly or remove a few items and try again.

When to Call a Professional

If the above steps don’t solve the problem—or if the DC code returns every few cycles—it’s best to book a fast, same-day repair to prevent further damage to your washer. Door sensor problems can be tricky, and continuing to force a cycle could make the issue worse.

At Express Appliance Repair, we offer emergency and same-day service for all Samsung washer problems, including the frustrating DC error. Our experienced technicians carry parts for most models and can usually fix the issue on the first visit.

Free service call with repair
Book online and get $25 off
Local experts near you
Transparent pricing, no surprise fees

Need help now? Our team is standing by.

👉 Click here to contact us for fast and reliable Samsung washer repair near you.

Let us take care of it—so you can get back to your laundry (and your life).

(647) 492-7773

Available 7 am – 10 pm including weekends and holidays